FormWood’s Form-Edge™ Edgebanding is produced by joining individual pieces of veneer together into a continuous master roll by finger-jointing the veneer. The rolls are laminated with a fleece, then sanded and slit to finished widths. Finger joints are made by joining the veneer together using a die cut finger layout in the veneer and then gluing them together using joint tape.

To ensure color and grain matching at the finger joint, every other piece of veneer is flipped end to end. The fleece (cellulous membrane) laminated to the back of the veneer provides strength to reduce cracking and breaking. The fleece is also colored to blend with the veneer to reduce any line between the banding and the substrate.

Features and Benefits

• Color and grain matching at the finger joint ensured by the
  production method and selection
• Fleece backer provides added strength on automatic non-glued and pre-glued Form-Edge and is colored to blend with veneer and substrate
• Inner core prevents edgebanding from easily uncoiling

Automatic (Non-Glued) Fleece Backed Edgebanding

• Thickness .022″ plus or minus .002″
• Standard length of continuous veneer roll – 500 lineal feet
• Surface finish 180 grit
• Weight 3.5 lbs. Per roll @ 7/8″

Pre-Glued Fleece Backed, Veneer Edgebanding

• Thickness .034″ plus or minus .002″ based on 0.12 of hot melt
• Standard length of continuous veneer roll – 250 lineal feet
• Surface finish 180 grit
• Weight 2.5 lbs. Per roll @ 13/16″

Material should be stored in plastic wrap to ensure moisture stability